Quick concrete stirring mechanical device and its corollary system

[0014] Example 1: An ultra-fast mixing soil mechanical equipment equipped with a feeding system

[0015] (1) Three large and small iron buckets (cement iron bucket, gravel iron bucket, and sand iron bucket) are used to store raw materials respectively. There are discharge ports at the bottom of the three large and small iron buckets. Three gauges are used for controlled discharge.

[0016] (2) The raw materials at the bottom of the three large and small iron buckets pass through their respective meters and are discharged in controlled quantities, and then the three materials enter their respective conveyors, and all enter the express mixing soil machinery equipment

[0017] (3) Install a water volume controller at the feed port of the express mixing mud mechanical equipment

[0018] Example 2: A structural system of an ultra-fast mixing soil mechanical equipment:

[0019] (1) Process a large or small finished shaft. Bearings are installed at both ends of the shaft, and a belt pulley is installed outside the bearing at the other end. The distance between the two bearings is respectively installed with several irons with large or small diameters. There are four equal round holes on the 90-degree edge of each iron plate disc, and four small shafts are connected to the four holes on the edge, and many movable blades are installed at a certain distance from each small shaft. .

[0020] (2) Install two bearing shells on a large or small finished shaft bearing, and fix the bearing shells on the iron frame at the same time. The blade is enclosed in the iron shell, and the two ends of the round iron shell are closed, welded, pressed and fixed with the iron shell. Make the large or small finished product shaft rotate, and then set the feed inlet and concrete

[0023] Example 3: An express concrete mixing machine equipped with a concrete conveying system

[0024] (1) Use two qualified steel sleeves with large or small diameters. Two pistons are respectively installed in the steel sleeves. A concrete inlet and a concrete outlet are provided at the specified positions on each steel sleeve. At the same time, according to the flow principle of concrete Designed to be fitted with movable valves.

[0025] (2) The belt pulley of the motor is connected with the belt pulley of the transmission disc with a V-belt, and then the belt pulley at the other end of the gearbox is connected with the belt pulley of the back and forth moving machine, and finally the moving rod of the back and forth moving machine is connected with the piston in the steel sleeve. Install the piston in the other steel sleeve in the same way.

[0026] (3) Connect the steel pipe or rubber pipe at the concrete outlet at one end of the steel sleeve to transport the concrete to