Patents
Literature
Hiro is an intelligent assistant for R&D personnel, combined with Patent DNA, to facilitate innovative research.
Hiro

2 results about "Impedance network" patented technology

The input impedance of an electrical network is the measure of the opposition to current (impedance), both static (resistance) and dynamic (reactance), into the load network that is external to the electrical source. The input admittance (1/impedance) is a measure of the load's propensity to draw current.

2-18GHz square law detector

InactiveCN110708038AHigh sensitivityHigh inhibitionPulse automatic controlOne-port active networksLow-pass filterSchottky diode
The invention discloses a 2-18GHz square law detector, which comprises an input matching network, a detector diode and a low-pass filter, and is characterized in that one end of the detector diode isconnected with the input matching network, and the other end of the detector diode is connected with the low-pass filter. The Schottky diode is a P-type Schottky low-barrier detection diode SMS7630-079LF of Skyworks. The detector works in a zero bias state; the working frequency range is 2-18 GHz, the voltage sensitivity is higher than 1500 mV / mW through a rear-stage low-pass filter matched with afront-stage impedance network, the peak value of about 6000 mV / mW at 5 GHz is achieved, the corresponding NEP is superior to 1.49 pW / Hz, the bandwidth is wide, and the harmonic suppression degree ishigh.
Owner:NANJING UNIV OF SCI & TECH

Time division multiplexing multi-level circuit and insulation impedance detection method

PendingCN114295895APhotovoltaic monitoringResistance/reactance/impedenceTime-division multiplexingImpedance network
The invention discloses a time division multiplexing multi-level circuit, which comprises switching tubes, an impedance network, a detection and control unit and a bus, and is characterized in that the switching tubes are respectively a first switching tube, a second switching tube, a third switching tube, a fourth switching tube and a fifth switching tube; the impedance networks comprise a first impedance network, a second impedance network, a third impedance network and a fourth impedance network; a second switch tube is connected with the first impedance network in parallel, a third switch tube is connected with the second impedance network in parallel, a fourth switch tube is connected with the third impedance network in parallel, and a fifth switch tube is connected with the fourth impedance network in parallel. According to the time-division multiplexing multi-level circuit and the insulation impedance detection method, the precision of the insulation impedance detection range can be improved in a wider range, impedance networks artificially added for calculating the insulation impedance in the current market are reduced, switching tubes for impedance switching can also be reduced, and the system cost is reduced while the performance is improved.
Owner:深圳市禾望科技有限公司
Who we serve
  • R&D Engineer
  • R&D Manager
  • IP Professional
Why Eureka
  • Industry Leading Data Capabilities
  • Powerful AI technology
  • Patent DNA Extraction
Social media
Try Eureka
PatSnap group products