Porcelain body glaze repairing method

[0012] Example 1

[0013] a. Mix 10 grams of resin-type electric porcelain repair agent and 5 grams of curing type electric porcelain repair agent and pigments to make a repair mixture. Add pigments to make the same as the repaired ones. The pigments used are black, yellow and red;

[0014] b. Clean the area to be repaired with acetone, and then dry it with a hair dryer;

[0015] c. Dilute the repair mixture in step a with 10 grams of acetone to the extent that it can flow through a 50-mesh filter, and add it to the spray gun through the 50-mesh filter, and spray the area to be repaired with the spray gun.

[0016] The above processed glaze has the advantages of good brightness and uniform glaze, but it will take a while to dry.

[0017] Example 2

[0018] a. Mix 10 grams of resin-type electric porcelain repair agent and 5 grams of curing type electric porcelain repair agent and pigments to make a repair mixture. Add pigments to make the same as the repaired ones. The pigments used are black, yellow and red;

[0019] b. Clean the area to be repaired with acetone, and then dry it with a hair dryer;

[0020] c. Dilute the repair mixture in step a with 10 grams of acetone to the extent that it can flow through a 60-mesh filter, and add it to the spray gun through a 50-mesh filter, and spray the parts to be repaired with the spray gun;

[0021] d. Blow the sprayed part with a hot air blower.

[0022] The above-processed glaze has the advantages of good brightness and uniform glaze, and some have bubbles.

[0023] Example 3

[0024] a. Mix 10 grams of resin-type electric porcelain repair agent and 5 grams of curing type electric porcelain repair agent and pigments to make a repair mixture. Add pigments to make the same as the repaired ones. The pigments used are black, yellow and red;

[0025] b. Clean the area to be repaired with acetone, and then dry it with a hair dryer;

[0026] c. Dilute the repair mixture in step a with 10 grams of acetone to the extent that it can flow through a 70-mesh filter, and add it to the spray gun through a 50-mesh filter. The high-pressure gas used by the spray gun is oxygen. Position

[0027] d. Blow the sprayed part with a hot air blower.

[0028] The above-processed glaze has the advantages of good brightness and uniform glaze. There is no moisture in the oxygen used, which will not block the nozzle of the spray gun, and the effect is better.

[0029] Nitrogen or acetylene used for oxygen has the same effect. Air cannot be used because impurities or moistu